Additive fuels meat-and-bone meal and sludge

Whether in coal power plants or in waste incineration plants, meat-and-bone meal and dried sludge are meanwhile an integral part of electricity and district heat generation. Approximately 5% meat-and-bone meal and approx. 2% dried sludge are added to the coal dust. These additive fuels are stored in silos.

VEGAFLEX 62 for level measurement of additive fuels

The robust construction of VEGAFLEX 62, which can handle tractive forces up to three tons, makes possible its use for additive fuels in containers and silos up to 40 m (112 ft) high. Being completely insensitive to buildup and intense dust generation, VEGAFLEX 62 is the ideal sensor for continuous filling level measurement. Because the instrument is already calibrated to the sensor length at the factory, on-site adjustment is not necessary.

VEGAVIB 62 for level detection

VEGAVIB 62 is implemented for level limitation in the meat-and-bone meal silo. This overfill protector with suspension cable extension renders dependable service here.

VEGAVIB 61 as min. level detector

VEGAVIB 61 is installed laterally and used as empty detector in the meat-and-bone meal silo. In the conveying process, it also takes on an important role as backup detector at the transfer station.

VEGAFLEX 62
VEGAFLEX 62
VEGAFLEX 62Setup without adjustment
VEGAFLEX 62Insensitive to dust and buildup
VEGAFLEX 62Cable electrode up to 60 m (197 ft) can be shortened
VEGAVIB 61
VEGAVIB 61
VEGAVIB 61Ideal rod design for bulk solids
VEGAVIB 61Setup without filling
VEGAVIB 61Individual mounting position
VEGAVIB 61High fault monitoring
VEGAVIB 62
VEGAVIB 62
VEGAVIB 62Overfill protection with suspension cable extension
VEGAVIB 62Ideal rod design for bulk solids
VEGAVIB 62Setup without filling
VEGAVIB 62Hgh fault monitoring